BPI-M2 Magic integrate four ARM Cortex-A7 CPU cores and Mali400MP2 graphics architecture, It also includes a variety of peripherals, BPI-M2 Magic with 512M DDR3，including 4 lane-MIPI DSI, LVDS, USB2.0 OTG/HOST,802.11 b/g/n wifi & BT4.0 onboard.

Note: 1,BPI-M2 Magic not HDMI interface. 2,Not support RJ45 interface

BPI-M2 Magic can run with Android smoothly, it also can run Debian, Ubuntu linux, Raspberry Pi image and others OS. It can easily run with the game it support 1080P high definition video output, the GPIO compatible with Raspberry Pi B+ and can run the ROM Image

allwinner R16 chip and A33 chip is PIN to PIN compatibility, so BPI-M2 Magic just replace R16 ,A33 chip onboard, easy to DIY new product.

Hardware interface:



Hardware spec:

Banana Pi M2 Magic
CPU	Allwinner R16 ARM Cortex-A7 Quad-Core
GPU	PowerVR SGX544MP1 Comply with OpenGL ES 2.0 OpenCL 1x, DX9_3
Memory	512MB LPDDR3 (shared with GPU)
Storage	On Board 8GB eMMC Flash, Micro SD-Card slot.
Network	Wi-Fi 802.11 b/g/n (AP6212) + Bluetooth BT4.0
Video Input(s)	A CSI input connector allows for the connection of a designed camera module
Video Output(s)	MIPI Display Serial Interface (DSI) for raw LCD Panel
Audio Input(s)	On board microphone
Audio Output(s)	3.5mm jack
USB ports	USB 2.0 PORT (x1), USB OTG (x1)
Remote	Not IR Receiver
GPIO	40 Pin Header : GPIO (x28) and Power (+5V, +3.3V and GND). Some of I/O Pin can be used for specific functions as UART, I2C, SPI or PWM
Switches	Reset, Power and U-boot
LED	Power Status and 8P8C
Power Source	5 volt @2A via DC Power and/or Micro USB (OTG)
Size & Weight	51x51mm, 48g
OS	Android and Linux

Allwinner R16 chip:


Online wiki development documents:  https://wiki.banana-pi.org/Banana_Pi_BPI-M2M