
Banana Pi BPI-JC10 is a fully open-source driver board platform for robotic joint motor applications. At its core are Fortior Technology’s FU7512L dual-core motor control MCU and FD6288Q three-phase gate driver IC, delivering native CAN/CAN FD support, dual onboard encoders, full closed-loop control, and MIT mode. The platform is specifically engineered for collaborative robot joints, integrated servo motors, exoskeletons, and wheel-legged robots
KeyFeatures:
-
MCU
-
RISC-V 32-bit core
-
ME2 (2nd-generation Motor Control Engine)
-
Supports hardware FOC module, dual current-loop sampling, hardware speed loop, hardware PI, hardware CORDIC module, hardware 4-stage configurable filter, etc.
-
-
50 MHz operating frequency
-
64 KB Flash, 12 KB SRAM
-
Junction temperature (Tj): -40 to 150°C
-
Operating temperature (Ta): -40 to 125°C
-
-
Board
-
Supports CAN/CAN FD communication
(CAN FD arbitration phase bit rate: 1 Mbit/s, data phase bit rate: 5 Mbit/s)
-
Onboard dual encoders, supporting full closed-loop control
-
Native support for MIT control
-
Board dimensions: ø60 mm
-
-
Module
-
Rated voltage: 48 V | Rated current: 6 Arms | Peak current: 40 Amp
-
Rated torque: 6 Nm | Peak torque: 18 Nm
-
Gear ratio: 7.75:1
-
Application direction:
-
Dual-encoder, fully closed-loop position control: high precision with no loss of position upon power loss.
-
Native CAN FD support + MIT control mode: designed for high-frequency dynamic control.
-
40A peak current: ensures stable closed-loop performance under high-dynamic loads, with overload protection to prevent loss of control.
-
Integrated servo, motor, and gearbox: compact, smaller, and lighter design.
-
Professional servo configuration software with a graphical interface for debugging.

BPI-JC10 Product Kit , with CE,FCC,RoHS , Can be directly applied to industrial-level projects.welcome for OEM&ODM

Online WIKI development documents: https://docs.banana-pi.org/en/BPI-JC10/BananaPi_BPI-JC10















